#!/usr/bin/perl

#############################################################################

##

## Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).

## All rights reserved.

## Contact: Nokia Corporation (qt-info@nokia.com)

##

## This file is part of the S60 port of the Qt Toolkit.

##

## $QT_BEGIN_LICENSE:LGPL$

## No Commercial Usage

## This file contains pre-release code and may not be distributed.

## You may use this file in accordance with the terms and conditions

## contained in the Technology Preview License Agreement accompanying

## this package.

##

## GNU Lesser General Public License Usage

## Alternatively, this file may be used under the terms of the GNU Lesser

## General Public License version 2.1 as published by the Free Software

## Foundation and appearing in the file LICENSE.LGPL included in the

## packaging of this file.  Please review the following information to

## ensure the GNU Lesser General Public License version 2.1 requirements

## will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

##

## In addition, as a special exception, Nokia gives you certain additional

## rights.  These rights are described in the Nokia Qt LGPL Exception

## version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

##

## If you have questions regarding the use of this file, please contact

## Nokia at qt-info@nokia.com.

##

##

##

##

##

##

##

##

## $QT_END_LICENSE$

##

#############################################################################

############################################################################################

#

# Convenience script for creating signed packages you can install on your phone.

#

############################################################################################

use strict;

# use a command-line parsing module

use Getopt::Long;

# Use file name parsing module

use File::Basename;

# Use File::Spec services mainly rel2abs

use File::Spec;

# Use File::Path - to make stub sis target directory

use File::Path;

# use CWD abs_bath, which is exported only on request

use Cwd 'abs_path';

sub Usage() {

    print <<ENDUSAGESTRING;

==============================================================================================

Convenience script for creating signed packages you can install on your phone.

Usage: createpackage.pl [options] templatepkg [target]-[platform] [certificate key [passphrase]]

Where supported optiobns are as follows:

     [-i|install]            = Install the package right away using PC suite

     [-p|preprocess]         = Only preprocess the template .pkg file.

     [-c|certfile=<file>]    = The file containing certificate information for signing.

                               The file can have several certificates, each specified in

                               separate line. The certificate, key and passphrase in line

                               must be ';' separated. Lines starting with '#' are treated

                               as a comments. Also empty lines are ignored. The paths in

                               <file> can be absolute or relative to <file>.

     [-u|unsigned]           = Preserves the unsigned package

Where parameters are as follows:

     templatepkg             = Name of .pkg file template

     target                  = Either debug or release

     platform                = One of the supported platform

                               winscw | gcce | armv5 | armv6 | armv7

     certificate             = The certificate file used for signing

     key                     = The certificate's private key file

     passphrase              = The certificate's private key file's passphrase

Example:

     createpackage.pl fluidlauncher_template.pkg release-armv5

Example with certfile:

     createpackage.pl -c=mycerts.txt fluidlauncher_template.pkg release-armv5

     Content of 'mycerts.txt' must be something like this:

        # This is comment line, also the empty lines are ignored

        rd.cer;rd-key.pem

        .\\cert\\mycert.cer;.\\cert\\mykey.key;yourpassword

        X:\\QtS60\\s60installs\\selfsigned.cer;X:\\QtS60\\s60installs\\selfsigned.key

If no certificate and key files are provided, either a RnD certificate or

a self-signed certificate from QtDir\\src\\s60installs directory is used.

==============================================================================================

ENDUSAGESTRING

    exit();

}

# Read given options

my $install = "";

my $preprocessonly = "";

my $certfile = "";

my $preserveUnsigned = "";

my $stub = "";

unless (GetOptions('i|install' => \$install,

                   'p|preprocess' => \$preprocessonly,

                   'c|certfile=s' => \$certfile,

                   'u|unsigned' => \$preserveUnsigned,

                   's|stub' => \$stub,)){

    Usage();

}

my $certfilepath = abs_path(dirname($certfile));

# Read params to variables

my $templatepkg = $ARGV[0];

my $targetplatform = lc $ARGV[1];

my @tmpvalues = split('-', $targetplatform);

my $target = $tmpvalues[0];

my $platform = $tmpvalues[1];;

# Convert visual target to real target (debug->udeb and release->urel)

$target =~ s/debug/udeb/i;

$target =~ s/release/urel/i;

my $certificate = $ARGV[2];

my $key = $ARGV[3];

my $passphrase = $ARGV[4];

# Generate output pkg basename (i.e. file name without extension)

my $pkgoutputbasename = $templatepkg;

my $preservePkgOutput = "";

$pkgoutputbasename =~ s/_template/_$targetplatform/g;

if ($pkgoutputbasename eq $templatepkg) {

    $preservePkgOutput = "1";

}

$pkgoutputbasename =~ s/\.pkg//g;

$pkgoutputbasename = lc($pkgoutputbasename);

# Store output file names to variables

my $pkgoutput = lc($pkgoutputbasename.".pkg");

my $sisoutputbasename = lc($pkgoutputbasename);

$sisoutputbasename =~ s/_$targetplatform//g;

my $unsigned_sis_name = $sisoutputbasename."_unsigned.sis";

my $signed_sis_name = $sisoutputbasename.".sis";

my $stub_sis_name = $sisoutputbasename."_stub.sis";

# Store some utility variables

my $scriptpath = dirname(__FILE__);

my $certtext = $certificate;

my $certpath = $scriptpath;

$certpath =~ s-^(.*[^\\])$-$1\\-o;          # ensure path ends with a backslash

$certpath =~ s-/-\\-go;                     # for those working with UNIX shells

$certpath =~ s-bin\\$-src\\s60installs\\-;  # certificates are one step up in hierarcy

# Check some pre-conditions and print error messages if needed.

unless (length($templatepkg)) {

    print "\nError: Template PKG filename is not defined!\n";

    Usage();

}

# If the pkg file is not actually a template, there is no need for plaform or target.

if ($templatepkg =~ m/_template\.pkg/i) {

    unless (length($platform) && length($target)) {

        print "\nError: Platform or target is not defined!\n";

        Usage();

    }

}

# Check template exist

stat($templatepkg);

unless( -e _ ) {

    print "\nError: Package description file '$templatepkg' does not exist!\n";

    Usage();

}

# Check certifcate preconditions and set default certificate variables if needed

if (length($certificate)) {

    unless(length($key)) {

        print "\nError: Custom certificate key file parameter missing.!\n";

        Usage();

    }

} else {

    #If no certificate is given, check default options

    $certtext = "RnD";

    $certificate = $certpath."rd.cer";

    $key = $certpath."rd-key.pem";

    stat($certificate);

    unless( -e _ ) {

        $certtext = "Self Signed";

        $certificate = $certpath."selfsigned.cer";

        $key = $certpath."selfsigned.key";

    }

}

# Read the certificates from file to two dimensional array

my @certificates;

if (length($certfile)) {

    open CERTFILE, "<$certfile" or die $!;

    while(<CERTFILE>){

        s/#.*//;                            # ignore comments by erasing them

        next if /^(\s)*$/;                  # skip blank lines

        chomp;                              # remove trailing newline characters

        my @certinfo = split(';', $_);      # split row to certinfo

        # Trim spaces

        for(@certinfo) {

            s/^\s+//;

            s/\s+$//;

        }

        # Do some validation

        unless(scalar(@certinfo) >= 2 && scalar(@certinfo) <= 3 && length($certinfo[0]) && length($certinfo[1]) ) {

            print "\nError: $certfile line '$_' does not contain valid information!\n";

            Usage();

        }

        push @certificates, [@certinfo];    # push data to two dimensional array

    }

}

# Remove any existing .sis packages

unlink $unsigned_sis_name;

unlink $signed_sis_name;

if (!$preservePkgOutput) {

    unlink $pkgoutput;

}

# Preprocess PKG

local $/;

# read template file

open( TEMPLATE, $templatepkg) or die "Error '$templatepkg': $!\n";

$_=<TEMPLATE>;

close (TEMPLATE);

# replace the PKG variables

s/\$\(PLATFORM\)/$platform/gm;

s/\$\(TARGET\)/$target/gm;

#write the output

open( OUTPUT, ">$pkgoutput" ) or die "Error '$pkgoutput' $!\n";

print OUTPUT $_;

close OUTPUT;

if ($preprocessonly) {

    exit;

}

if($stub) {

    if(!($ENV{EPOCROOT})) { die("EPOCROOT must be set to create stub sis files"); }

    my $systeminstall = "$ENV{EPOCROOT}epoc32/data/z/system/install";

    mkpath($systeminstall);

    my $stub_sis_name = $systeminstall."/".$stub_sis_name;

    # Create stub SIS.

    system ("makesis -s $pkgoutput $stub_sis_name");

} else {

    # Create SIS.

    system ("makesis $pkgoutput $unsigned_sis_name");

    print("\n");

    # Sign SIS with certificate info given as an argument.

    system ("signsis $unsigned_sis_name $signed_sis_name $certificate $key $passphrase");

    # Check if creating signed SIS Succeeded

    stat($signed_sis_name);

    if( -e _ ) {

        my $targetInsert = "";

        if ($targetplatform ne "-") {

            $targetInsert = "for $targetplatform ";

        }

        print ("Successfully created $signed_sis_name ${targetInsert}using certificate: $certtext!\n");

        # Sign with additional certificates & keys

        for my $row ( @certificates ) {

            # Get certificate absolute file names, relative paths are relative to certfilepath

            my $abscert = File::Spec->rel2abs( $row->[0], $certfilepath);

            my $abskey = File::Spec->rel2abs( $row->[1], $certfilepath);

            system ("signsis $signed_sis_name $signed_sis_name $abscert $abskey $row->[2]");

            print ("\tAdditionally signed the SIS with certificate: $row->[0]!\n");

        }

        # remove temporary pkg and unsigned sis

        if (!$preservePkgOutput) {

            unlink $pkgoutput;

        }

        if (!$preserveUnsigned) {

            unlink $unsigned_sis_name;

        }

        # Install the sis if requested

        if ($install) {

            print ("\nInstalling $signed_sis_name...\n");

            system ("$signed_sis_name");

        }

    } else {

        # Lets leave the generated PKG for problem solving purposes

        print ("\nSIS creation failed!\n");

    }

}

#end of file